Line, Plant and Enterprise. The Line tier covers one control or inspection module on one drawing, stranding or extrusion line. Plant covers the whole loop. Enterprise is for multi-site groups. Annual prepay carries a 15 to 20% discount and outcome components are available on yield, scrap, length and energy.
Floor pricing is protected. Discounts are traded for term length and a published case study.
Land on one workflow with a measured baseline. Expand by line, module and autonomy level. Outcome components are available on yield, scrap, length and energy. Annual prepay carries a 15 to 20% discount.
Drawing or extrusion control, or inspection, for a single line. For cable makers validating ROI on the wedge.
The whole loop: draw and anneal, strand and cable, insulate and jacket, defect, quality and dimension, yield and takt, robotic handling and the twin.
Multi-site wire and cable groups standardising on Draweon, with custom conductor, insulation and tolerance models.
Products are licensed per line on the Line tier and bundled on Plant and Enterprise.
| Capability | Line | Plant | Enterprise |
|---|---|---|---|
| Lines covered | 1 | All on site | All in group |
| Agent modules | 1 of 5 products | All agents | All agents + custom models |
| As-run line twin (Simweon) | No | Included | Custom models |
| Plant-edge node | Included | Per line | Fleet managed |
| Guarded controller writes | Scoped tags | All scoped tags | Group policy |
| Reel and length genealogy | Included | Included | Included + export |
| Autonomy levels | L1 to L2 | L1 to L3 | L1 to L4 when qualified |
| SSO and RBAC | No | Planned | Planned, with approval chains |
| On-prem deployment | No | Optional | Included |
| Support | Business hours | 24/7 | 24/7 + named engineer |
| Indicative price | $14,000/mo | $90,000/mo | $650k to $8.5M ACV |
We do not publish savings percentages because we have not measured any yet. These are the inputs a plant brings to the pilot baseline, and the outputs the pilot measures.
A run engine that produces this record on every changeover, every shift, on every line you license.
Plant Orchestrator · Pulled the construction spec for 2.5 mm² class 2 PVC building wire from MES: 7 × 0.67 mm conductor, 0.80 mm nominal wall, 0.62 mm minimum spot wall, 6 kV spark test, 48 km order. Locked the target envelope.
Line Twin · Simulated 36 candidate recipes on the as-run line twin for draw schedule, lay length and extrusion setpoints, ranked on wall variance, concentricity, predicted spark risk and polymer give-away.
Draw-and-Anneal · Capstan tension on RB1 stepped down 6% as the die-wear estimate crossed its threshold. Diameter held at 0.670 mm ± 0.004 mm and the break-risk score fell from 0.31 to 0.09.
Draw-and-Anneal · Annealer current trimmed against the live conductivity reading to hold the softness target without over-anneal through the speed change.
Strand-and-Cable · Lay length set to 28 mm on bunching line ST2 with payoff tension balanced across 7 spools. Roundness index held above 0.97 into the extrusion payoff.
Insulate-and-Jacket · Screw speed and zone 3 temperature re-cut against melt pressure and material-lot moisture. Wall settled at 0.80 mm nominal, minimum 0.66 mm, concentricity 0.93.
Defect-and-Inspect · 6 cameras, the laser gauge, the eddy-current head and the spark tester fused at the edge. One neckdown precursor at 12,480 m flagged and cleared by a screw-speed trim before it reached the reel.
Plant Orchestrator · Line-speed ramp 1,100 to 1,250 m/min exceeded the site autonomy threshold. Held for the shift process engineer and approved at 06:41:52.
Robot-and-Handling · Reel change on take-up TU3 planned and executed by the handling robot. Payoff aligned and tension re-established inside the changeover window.
Quality-and-Conformance · Reel R-30417 released: genealogy written (conductor lot, draw and anneal record, lay, wall and concentricity trace, defect map, approvals) and checked against the construction spec.
Power, building wire, automotive and EV harness, data and fibre, magnet and specialty. Most plants pick one line and one wedge, prove the number, then expand.
Large conductors, long runs and dielectric requirements that leave no margin. Drawing, stranding and insulation control with fused inspection on every reel.
Thin walls at high line speed, where give-away and spark faults decide margin. Extrio and Eddix on the insulation line first.
Small conductors, thin walls and USCAR qualification. Concentricity and spark prediction before the reel, genealogy for every lot.
Lay and geometry decide electrical performance. Cablyn holds lay and roundness and hands a round core to extrusion.
Fine diameters, exact conductivity and softness. Drawix on break prediction and annealing control, energy per reel measured.
Draweon writes to production equipment. Every capability is scoped, every write is policy-checked, and every action is written to an append-only audit log the plant owns.
| Item | Scope | Status |
|---|---|---|
| SOC 2 Type I | Cloud control plane | QUEUED Planned, first 6 months |
| SOC 2 Type II | Cloud control plane | QUEUED Planned, 6 to 12 months |
| SSO and RBAC | Console and approvals | QUEUED Planned, 6 to 12 months |
| Standards-cited reasoning | UL, IEC, IPC, USCAR documents | RUNNING In the design, every answer cites its source |
| Per-tenant isolation | Recipes, models, memory | RUNNING In the design from day one |
| On-prem and plant-edge deployment | Sensitive producers | RUNNING Design option |
One policy model, one audit trail, one benchmark across every line in every plant, with the conductor, insulation and tolerance models kept private to each site.
The questions plant directors and process engineers ask in the first meeting.
Yes, but only within an explicit tag allow-list with per-tag rate and magnitude limits, and only at the autonomy level your plant has set. Level 1 is advisory: Draweon recommends and a human enters everything. Design partners start there, in shadow mode, before supervised writes.
Control returns to the line controller's last known-good state. Draweon is a supervisory layer on top of the PLCs and gauges you already run, never a replacement for them, so an outage degrades the line to its current way of running, not to a stop.
Advisory recommendations start from the physics-based twin and the construction spec in the first weeks. Defect prediction and break prediction improve as line history and labelled events accumulate per construction. The first training sets are sized at 5 to 20 million labelled frames and events, a design target.
Only if you choose cloud training. Recipes, process models and defect libraries are isolated per tenant and never used to train another customer's models. A fully on-prem deployment at the plant edge is available for sensitive producers.
You are, the same as with any control strategy, which is why every write is policy-checked, bounded, logged and reversible, and why anything above your risk threshold waits for a named approver. The audit log records the request, the reasoning, the limits applied and the human decision.
A paid pilot on one line, scoped to a single workflow with a baseline agreed in writing. Weeks 1 to 3 are connection and shadow-mode observation, weeks 4 to 8 are assist mode with engineer approval, and bounded autonomy follows if the plant is satisfied with the recommendations.
Start with one drawing, stranding or extrusion line and one measurable baseline. A paid pilot on wall and concentricity, break prediction or spark prediction shows the number before you commit further.
↑↓ navigate↵ openesc close
